How to add products on a Northwood Vectron till

How to add products on a Northwood Vectron till

  1. Open Northwood software.

2.Go in to Plu's button.

3. Add desired products in the relevant Department, press Close.

4. Go into Selection Windows, press the + Plu button and repeat the adding process of the same products, press Save then Close on both windows.

5. Press the Program Vectron POS button, it will load the changes.

6. Open Vectron Commander and Press Communication > Execute jobchains.

7. The changes should be push to the tills, keep Commander open until all Command import disappear.

8. You can verify if the changes made are showing on the till by accessing the Communication > Vectron POS Anywhere button an select the relevant till.

    • Related Articles

    • Adding products to Vectron

      1. Open Vectron Commander, press ECR programs > Edit and select desired till. 2. Press Transmit ECR programs. 3. select the relevant till and press Continue. 4. Select what data has changes and press Continue. 5. Select if you want to send all data ...

    • Vectron - Adding Products to the Fast Bar

      This will be a quick walk-through to help you add new products on to the Fast Bar. It is possible to add other functions to the Fast Bar however we would recommend contacting us to do this for you as it may not be set up to handle other functions. ...

    • ICRTouch - How to add a PLU in Touch Office Web

      Adding an item to ICRTouch EPOS Systems that are synchronised to Touch Office Web is easy, with only a few steps! Head to www.touchoffice.net and log in with the details provided by EPOS NI. Select the "Products" section on the left. Find the ...

    • ICRTouch - How to add a PLU in Touch Office Web

      Adding an item to ICRTouch EPOS Systems that are synchronised to Touch Office Web is easy, with only a few steps! Head to www.touchoffice.net and log in with the details provided by EPOS NI. Select the "Products" section on the left. Find the ...

    • Vectron - To change/add staff names

      TO CHANGE/ADD STAFF NAMES SIGN ON PRESS 4 THEN MODE (P,R,X,Z) BUTTON SELECT NO 2 OPERATORS AND PRESS ENTER THEN SELECT OPERATORS (NO.1) ON NEXT SCREEN A LIST OF PRESENT STAFF WILL BE SHOWN JUST SCROLL DOWN AND AMEND OR ADD THEN PRESS ESCAPE ONCE AND ...