Vectron - Tablet Operation

Vectron - Tablet Operation

INSTRUCTIONS ON TABLET OPERATION.

1.TO LOG ON INITIALLY TOUCH THE VECTRON ICON ON SCREEN

2.TOUCH ENABLE/DEMO MODE

3.TOUCH RESET APP – THEN OK

4.TOUCH CONNECT – THEN TOUCH OPERATOR

5.ENTER YOUR OPERATOR NO. AND PRESS SIGN IN.

6.THEN TOUCH GC SELECTION FOR TABLES

7.PRESS GREEN ICON AT TOP LEFT CORNER OF SCREEN

8.NOW ENTER TABLE NUMBER OF NEW ORDER

9. NOW ENTER NO OF GUESTS AT TABLE AND PRESS O.K.

10.NOW TOUCH FOOD OR DRINK AT TOP OF SCREEN

11.SELECT E.G STARTERS.

12.TOUCH THE NAME OF THE ITEMS TO ENTER

13. NOTE: IF YOU WANT TO ADD A KITCHEN MESSAGE TOUCH THE PRICE SQUARE AT RIGHT HAND SIDE BEFORE ENTERING ITEM AND TYPE MESSAGE INTO PLU INFO LINE. – THEN PRESS OK – ITEM WILL BE REGISTERED AUTOMATICALLY.#

12. TO STORE THE ORDER PRESS “RECEIPT” AT TOP OF SCREEN

THEN PRESS GREEN GC BUTTON AT BOTTOM LEFT CORNER OF SCREEN.

13.A SCREEN WITH ALL OPEN TABLES WILL NOW BE DISPLAYED.

14. TO ADD MORE ITEMS TO AN OPEN TABLE JUST PRESS TABLE SQUARE AND REPEAT FROM 10. ABOVE.

15. TO PRINT A BILL AT TILL POINT FROM TABLET PRESS TABLE SQUARE, THEN PRESS FUNCTIONS(TOP R,H,SIDE OF SCREEN

THEN PRESS SUBTOTAL INVOICE.

16. NOTE: BILLS CAN ONLY BE CASHED OFF AT TILL POINT!


OTHER TABLET INSTRUCTIONS.

TO VOID AN ITEM OFF A TABLE DO THE FOLLOWING:

CALL UP TABLE AS NORMAL

PRESS FUNCTIONS

PRESS VOID ICON

TOUCH THE GREEN (R.H.SIDE) OF ITEM

THIS WILL VOID THE ITEM FROM THE BILL

REPEAT TO VOID ANOTHER ITEM

THEN PRESS VOID AT BOTTOM OF SCREEN

THIS WILL TAKE YOU BACK TO OPEN TABLE SCREEN.

NOTE: IF YOU GET AN ERROR 905 – NO CONNECTION TO POS SYSTEM

(ESPECIALLY IF YOU HAVE BEEN PROGRAMMING TILL) DO THE FOLLOWING:

TOUCH THE 3 LINES BESIDE VECTRON NAME AT TOP OF SCREEN

PRESS ENABLE/DEMO MODE ICON

PRESS RESET APP THEN PRESS OK

THEN PRESS ENABLE AGAIN THEN CONNECT

TABLET SHOULD THEN RE-CONNECT TO TILL NETWORK.

IF STILL NO CONNECTION DO THE FOLLOWING:

GO TO MANAGERS SCREEN ON TILL AND PRESS WHITE LIST BUTTON AND DELETE DATA.

THEN PRESS CLIENT LIST BUTTON AND DO SAME.

AFTER THIS YOU WILL HAVE TO ENTER 111 ENTER ON TILL SCREEN

TABLET SHOULD THEN CONNECT AND RELOAD DATA.

    • Related Articles

    • Vectron - Table Operation

      TABLE OPERATION INSTRUCTIONS FOR TILL FIRSTLY SIGN ON ENTER TABLE NO AND PRESS ORDER/STORE BUTTON (OR PRESS TABLE PLAN AND SELECT TABLE) ENTER ITEMS TO TABLE AS REQUIRED TO STORE YOU MUST PRESS ORDER/STORE TABLE BUTTON AGAIN IF YOU DON’T TABLE WILL ...

    • Vectron - Operation of Hand Held Terminal

      PRESS OPERATOR ENTER YOUR OPERATOR NUMBER AND PRESS SIGN IN PRESS GC(TABLE) SELECTION FOR A NEW TABLE PRESS GREEN TABLE SYMBOL ENTER TABLE NO AND ENTER NO OF COVERS PRESS OK PRESS FOOD OR DRINK AT TOP OF SCREEN THEN SELECT MENU REQUIRED (EG STARTERS) ...

    • Adding products to Vectron

      1. Open Vectron Commander, press ECR programs > Edit and select desired till. 2. Press Transmit ECR programs. 3. select the relevant till and press Continue. 4. Select what data has changes and press Continue. 5. Select if you want to send all data ...

    • How to add products on a Northwood Vectron till

      Open Northwood software. 2.Go in to Plu's button. 3. Add desired products in the relevant Department, press Close. 4. Go into Selection Windows, press the + Plu button and repeat the adding process of the same products, press Save then Close on both ...

    • Vectron - Program Operator Groups

      Number Reference number Name Name of Operator group Needs sign in unused Mode Manager overwrite - Allows the operator to sign on over the operator currently signed on. Only works with forced tables Training - Enable training mode, anything done in ...