Vectron - To edit a table plan

Vectron - To edit a table plan

TO EDIT TABLE PLAN

SIGN ON

PRESS 4 MODE TO GO INTO PROGRAMME

SELECT INPUT

SELECT TABLE MAP

SELECT BAR PLAN

PRESS EDIT BUTTON WHICH IS 2 TO RIGHT OF ESCAPE

THEN SLIDE TABLES AROUND SCREEN TO SUIT YOUR PLAN

WHEN YOU HAVE MOVED A TABLE TO THE DESIRED POSITION PRESS

ENTER ON BLUE GRID.

THEN REPEAT FOR NEXT TABLE ETC.

WHEN FINISHED JUST PRESS ESCAPE ESCAPE ESCAPE TO EXIT.

    • Related Articles

    • ICRTouch - Edit table plan

      Follow the steps below: Log into a manger clerk on your till, then head to the home menu and click on "Manager functions". From here, hit "Edit floor plan". To move tables, hit a table, then click move on the black box on the screen. This table can ...

    • Vectron - Table Operation

      TABLE OPERATION INSTRUCTIONS FOR TILL FIRSTLY SIGN ON ENTER TABLE NO AND PRESS ORDER/STORE BUTTON (OR PRESS TABLE PLAN AND SELECT TABLE) ENTER ITEMS TO TABLE AS REQUIRED TO STORE YOU MUST PRESS ORDER/STORE TABLE BUTTON AGAIN IF YOU DON’T TABLE WILL ...

    • Adding products to Vectron

      1. Open Vectron Commander, press ECR programs > Edit and select desired till. 2. Press Transmit ECR programs. 3. select the relevant till and press Continue. 4. Select what data has changes and press Continue. 5. Select if you want to send all data ...

    • Vectron - To reprint a previously paid table

      TO REPRINT A PREVIOUSLY PAID TABLE SIGN ON PRESS MANAGER BUTTON PRESS PURPLE REPRINT TABLE BUTTON SCROLL UP AND TOUCH BILL REQUIRED THEN PRESS GREY PRINT RECEIPT BUTTON (BESIDE THE NO.6) NOTE: DO NOT PRESS THE TICK AT TOP OF SCREEN

    • Vectron - Tablet Operation

      INSTRUCTIONS ON TABLET OPERATION. 1.TO LOG ON INITIALLY TOUCH THE VECTRON ICON ON SCREEN 2.TOUCH ENABLE/DEMO MODE 3.TOUCH RESET APP – THEN OK 4.TOUCH CONNECT – THEN TOUCH OPERATOR 5.ENTER YOUR OPERATOR NO. AND PRESS SIGN IN. 6.THEN TOUCH GC SELECTION ...