Vectron - To place a new PLU on to a screen

Vectron - To place a new PLU on to a screen

NOTE: BE VERY CAREFUL WITH FOLLOWING INSTRUCTIONS – YOU NEED A STEADY HAND OTHERWISE YOU CAN DISPLACE BUTTONS!!!

  1. PRESS MANAGERS SCREEN BUTTON

  2. PRESS 999 THEN MODE BUTTON

  3. SELECT (INPUT)

  4. THEN SELECT (BUTTONS)

  5. SELECT SCREEN YOU WISH TO PLACE NEW BUTTON INTO. EG. BURGERS

  6. PRESS EDITOR BUTTON(THIS IS 2ND BUTTON TO RIGHT OF ESC WHICH IS AT TOP OF QWERTY KEYBOARD)-(ON SOME VERSIONS LOOKS LIKE A NOTEPAD WITH A PENCIL).

  7. TOUCH SQUARE WHICH YOU WANT TO CHANGE.

  8. THEN PRESS BLUE EDIT BUTTON ON SMALL BLUE GRID

  9. ON CODE LINE (BELOW FUNCTION) ENTER THE PLU NO OF NEW ITEM-IF YOU CAN’T REMEMBER WHAT IT IS JUST TOUCH THE WHITE CODE LINE AND ALL PLUS WILL BE DISPLAYED-SELECT AS REQUIRED.

YOU CAN ALSO CHANGE THE COLOUR OF THIS BUTTON

FURTHER DOWN-JUST PRESS BESIDE BACKGROUND

COLOUR AND SELECT COLOUR.

WHEN FINISHED PRESS ESCAPE TWICE AND SEND TO OTHER TILLS OR GO BACK TO NO.7 ABOVE AND REPEAT FOR MORE ITEMS.