Vectron - Error Fix Solutions

• Related Articles

• Vectron - Tablet Operation

  INSTRUCTIONS ON TABLET OPERATION. 1.TO LOG ON INITIALLY TOUCH THE VECTRON ICON ON SCREEN 2.TOUCH ENABLE/DEMO MODE 3.TOUCH RESET APP – THEN OK 4.TOUCH CONNECT – THEN TOUCH OPERATOR 5.ENTER YOUR OPERATOR NO. AND PRESS SIGN IN. 6.THEN TOUCH GC SELECTION ...

• Till boot issue fix - Error Abort 61 (after Dump flashing)

  Switch machine off Put your thumb halfway up screen at left side about 1 inch in from edge. Hold it there while you switch it on Remove it immediately when machine bleeps takes about 30secs to 1 minute Then when grid is on screen press Del inv data ...

• Customer signed off - Error 62

  Press 1 then Operator no. will fix this issue.

• Adding products to Vectron

  1. Open Vectron Commander, press ECR programs > Edit and select desired till. 2. Press Transmit ECR programs. 3. select the relevant till and press Continue. 4. Select what data has changes and press Continue. 5. Select if you want to send all data ...

• Vectron - Program Printer

  If Print Data is set under Net/Comm parameters then the till selected will handle all of the printing information. Print Data allows a till to send all of its print jobs to the till set in the parameter. e.g Print Data = 3, the till will send its ...