Vectron - New POS Network Setup

Vectron - New POS Network Setup

When setting up for the first time, use DHCP to pull the settings from the Router.
Once settings are inputted into the correct fields, switch off DHCP and change
the POS IP address to one in the same subnet but outside of the range of the DHCP allocation pool to avoid potential IP conflicts
    • Related Articles

    • Vectron - Tablet Operation

      INSTRUCTIONS ON TABLET OPERATION. 1.TO LOG ON INITIALLY TOUCH THE VECTRON ICON ON SCREEN 2.TOUCH ENABLE/DEMO MODE 3.TOUCH RESET APP – THEN OK 4.TOUCH CONNECT – THEN TOUCH OPERATOR 5.ENTER YOUR OPERATOR NO. AND PRESS SIGN IN. 6.THEN TOUCH GC SELECTION ...
    • Vectron - To place a new PLU on to a screen

      NOTE: BE VERY CAREFUL WITH FOLLOWING INSTRUCTIONS – YOU NEED A STEADY HAND OTHERWISE YOU CAN DISPLACE BUTTONS!!! PRESS MANAGERS SCREEN BUTTON PRESS 999 THEN MODE BUTTON SELECT (INPUT) THEN SELECT (BUTTONS) SELECT SCREEN YOU WISH TO PLACE NEW BUTTON ...
    • Vectron - Categories

      Categories use PLU selections to group up the PLUs and display them on a dynamic screen element making them an easy way to display the customers PLU list. Once the PLUs have been added to the system then go to Assistants/PLU selection and create the ...
    • How to add products on a Northwood Vectron till

      Open Northwood software. 2.Go in to Plu's button. 3. Add desired products in the relevant Department, press Close. 4. Go into Selection Windows, press the + Plu button and repeat the adding process of the same products, press Save then Close on both ...
    • How to setup online payment for Touch Takeaway

      This is an example of a takeaway system: 1. In order to add a card payment system, navigate to Tillconfig.net of the company you want to setup. 2. Click on TAKEAWAY section. 3. Click on Payment Settings. 4. Under Ps Connect E section, complete the ...