Vectron - Other instructions

Vectron - Other instructions

GO TO MANAGERS SCREEN

FIRSTLY

TAKE X-REPORT FINANCIAL REPORT

THEN

TAKE X-REPORT PLU REPORT.(THIS IS IN THE X-REPORT

OPTION BUTTON)

THEN:

(EXAMPLE)-

PRESS VOID -25 X COFFEE

PRESS VOID - 20 X CHIPS

PRESS VOID – 10 X BURGER

PRESS CASH TOTAL

THEN:

TAKE Z-REPORT FINANCIAL REPORT

THEN

TAKE Z-REPORT PLU REPORT.

    • Related Articles

    • Vectron - Tablet Operation

      INSTRUCTIONS ON TABLET OPERATION. 1.TO LOG ON INITIALLY TOUCH THE VECTRON ICON ON SCREEN 2.TOUCH ENABLE/DEMO MODE 3.TOUCH RESET APP – THEN OK 4.TOUCH CONNECT – THEN TOUCH OPERATOR 5.ENTER YOUR OPERATOR NO. AND PRESS SIGN IN. 6.THEN TOUCH GC SELECTION ...

    • Adding products to Vectron

      1. Open Vectron Commander, press ECR programs > Edit and select desired till. 2. Press Transmit ECR programs. 3. select the relevant till and press Continue. 4. Select what data has changes and press Continue. 5. Select if you want to send all data ...

    • Vectron - Table Operation

      TABLE OPERATION INSTRUCTIONS FOR TILL FIRSTLY SIGN ON ENTER TABLE NO AND PRESS ORDER/STORE BUTTON (OR PRESS TABLE PLAN AND SELECT TABLE) ENTER ITEMS TO TABLE AS REQUIRED TO STORE YOU MUST PRESS ORDER/STORE TABLE BUTTON AGAIN IF YOU DON’T TABLE WILL ...

    • How to add products on a Northwood Vectron till

      Open Northwood software. 2.Go in to Plu's button. 3. Add desired products in the relevant Department, press Close. 4. Go into Selection Windows, press the + Plu button and repeat the adding process of the same products, press Save then Close on both ...

    • Vectron - To place a new PLU on to a screen

      NOTE: BE VERY CAREFUL WITH FOLLOWING INSTRUCTIONS – YOU NEED A STEADY HAND OTHERWISE YOU CAN DISPLACE BUTTONS!!! PRESS MANAGERS SCREEN BUTTON PRESS 999 THEN MODE BUTTON SELECT (INPUT) THEN SELECT (BUTTONS) SELECT SCREEN YOU WISH TO PLACE NEW BUTTON ...