Vectron - Parameters Service

• Related Articles

• Vectron - Important Program Links

  ECR Config Program ProgramLinks Parameters Use the following: 1-80 115 142

• Adding products to Vectron

  1. Open Vectron Commander, press ECR programs > Edit and select desired till. 2. Press Transmit ECR programs. 3. select the relevant till and press Continue. 4. Select what data has changes and press Continue. 5. Select if you want to send all data ...

• Vectron - Tablet Operation

  INSTRUCTIONS ON TABLET OPERATION. 1.TO LOG ON INITIALLY TOUCH THE VECTRON ICON ON SCREEN 2.TOUCH ENABLE/DEMO MODE 3.TOUCH RESET APP – THEN OK 4.TOUCH CONNECT – THEN TOUCH OPERATOR 5.ENTER YOUR OPERATOR NO. AND PRESS SIGN IN. 6.THEN TOUCH GC SELECTION ...

• Vectron - Program Printer

  If Print Data is set under Net/Comm parameters then the till selected will handle all of the printing information. Print Data allows a till to send all of its print jobs to the till set in the parameter. e.g Print Data = 3, the till will send its ...

• How to add products on a Northwood Vectron till

  Open Northwood software. 2.Go in to Plu's button. 3. Add desired products in the relevant Department, press Close. 4. Go into Selection Windows, press the + Plu button and repeat the adding process of the same products, press Save then Close on both ...