How to Clone a Windows 10 image on new tills

How to Clone a Windows 10 image on new tills

  1. Insert 2 USB provided ( Acronis & Windows image )
  2. When start image appears, press and hold Delete key
  3. Navigate to Boot tab and change Options 1-4
Option 1: UEFI:USB
Option 2: UEFI:USB
Option 3: USB
Option 4: PO: *********
  1. Save and exit tab, or press F10 to do so and the PC will restart
  2. On the next screen go to Recovery tab and click Disk and Partition Recovery

  1. Select Recover whole disks and partitions

  1. Go back until there will be one green date and select it then select provided time

  1. Select Disk 1 to tick all partitions

  1. Select the disk with the highest amount 

  1. Click Next - OK - Proceed
  2. Tick checkbox restart the computer when the operation is completed

    • Related Articles

    • Vectron - To place a new PLU on to a screen

      NOTE: BE VERY CAREFUL WITH FOLLOWING INSTRUCTIONS – YOU NEED A STEADY HAND OTHERWISE YOU CAN DISPLACE BUTTONS!!! PRESS MANAGERS SCREEN BUTTON PRESS 999 THEN MODE BUTTON SELECT (INPUT) THEN SELECT (BUTTONS) SELECT SCREEN YOU WISH TO PLACE NEW BUTTON ...

    • Vectron - New POS Network Setup

      When setting up for the first time, use DHCP to pull the settings from the Router. Once settings are inputted into the correct fields, switch off DHCP and change the POS IP address to one in the same subnet but outside of the range of the DHCP ...

    • How to add products on a Northwood Vectron till

      Open Northwood software. 2.Go in to Plu's button. 3. Add desired products in the relevant Department, press Close. 4. Go into Selection Windows, press the + Plu button and repeat the adding process of the same products, press Save then Close on both ...

    • Vectron - To Change Prices, item names, staff names

      CLICK ON ECR PROGRAMMES CLICK ON EDIT SELECT TILL1 AND EXECUTE ALL SALES ITEMS ARE DISPLAYED BY DEFAULT CLICK ON NAME OR PRICE TO CHANGE ENTER NEW NAME OR PRICE REPEAT FOR MORE ITEMS WHEN FINISHED PRESS SAVE BUTTON(ICON JUST ABOVE PLU’S ETC IN FOLDER ...

    • Vectron - Editing PLU Categories

      Here I will go through how to edit a PLU Category. I won't be able to go into details of everything in PLU Categories as they are quite expansive and a lot of whats there is not relevant to any day to day changes. I will just be going through adding ...